Skip to content
Home
Glowmax Top Coat High Gloss
Glowmax Top Coat enhances the natural beauty of wood grain like no other finish. It provides a lustrous, long-lasting glow that won’t darken or yellow over time. This professional-grade clear coating not only beautifies but also offers strong protection against spills, sunlight, and scuff marks. When used over Glowmax Sealcoat, it penetrates and merges with the base layer to create a seamless, single protective layer from the bottom to the top, ensuring a durable and flawless finish.
Glowmax Top Coat High Gloss

• Great all-purpose clear wood finish
• Does not darken or yellow with age
• Dries lightning fast – can be sanded & recoated in 1 hour
• All Weather Usage
• Odor Barrier Coating
• Heat and Water Resistant
• Penetrative Wood Finish
• Excellent Scratch Repairability
• Provides exceptional beauty, protection & durability
• Available in High Gloss, Semi-Gloss, Satin and Matt sheens

FOR BEST RESULTS

Apply in direction of wood grain in smooth, level strokes. Apply 2 to 3 thin and even coats for better finish when applying with a brush or a spray gun.

AVAILABLE SIZES

• 1 ltr
• 5 ltrs
• 20 ltrs

‘GLOWMAX Top Coat’ is a durable finish which can be used over any type of Sanding Sealer. Apply several thin coats of ‘GLOWMAX Top Coat’ with sprayer, brush, pad or lint-free muslin cloth. Multiple thin coats are more effective than 1 or 2 thick coats. Apply evenly and allow drying for 20 to 30 minutes before sanding with 120 or finer grit sandpaper and recoating. When spraying, it completely dries in less than 1 hour and can be sanded & coated again to achieve best results. Stir well before and occasionally during use.

Methods:

Wiping

Dilute ‘GLOWMAX Top Coat’ with Thinner/ Moisture-less Spirit in the ratio of upto 1:3 when applying with a muslin cloth pad. Apply the mixture with gentle pressure over the wood surface, in the direction of the grains, till desired result is achieved.

 

Brushing

For best results use a 2” or 3” natural bristle or high quality synthetic bristle brush. Dip half the length of the bristles into the container containing GLOWMAX and lightly tap the flat side of the brush against the side of the container. Apply to the surface following the wood grains and using full, even strokes. When applying to vertical surfaces, avoid drips and runs by loading the brush with a little less solution. Avoid Excessive brushing. Dilute with NC/Retarder Thinner in the ratio 1:2 or more if required.

Sprayer

GLOWMAX can be spray applied using conventional, HVLP or air-less systems. Use a 0.011 to 0.013 tip and 800 to 1000 psi for spray application (Follow Equipment manufacturers instructions). While spraying GLOWMAX, do it in the direction of the wind.

  • Appearance: Clear pale yellow liquid
  • Odor: Alcohol type odor
  • Physical State: Liquid
  • PH: 5.2 – 5.5
  • Boiling Point: 77.7778° – 85° C
  • Melting/Freezing Point: -113.889° C
  • Auto-ignition Temp: 362.778° F
  • Viscosity: 15 cps
  • Specific Gravity (water = 1) : >0.88
  • Water Solubility: Non Compatible – Only the alcohol portion is soluble in water. The other ingredients will from a gelatinous layer on top of water.
Handling:

Keep away from heat, spark, and flame. Keep operating temperatures below ignition temperatures at all times. Use with adequate ventilation. Avoid contact with eyes, skin and clothing.

Storage:

Store in a Cool Dry place away from heat. Keep away from heat, sparks and flame. Keep containers tightly closed and upright when not in use. Protect against physical damage.